Step-by-step instructions for connecting to a Raspberry Pi.
These procedures apply to Raspberry Pi 5, 4 or 3 with Raspberry Pi OS (64-Bit), (32-Bit), (Legacy 64-Bit) or (Legacy 32-Bit).
General Notes
1. General:
The procedures below are optimized for connecting to a Raspberry Pi 5, 4 or 3 with Raspberry Pi OS (64-Bit), (32-Bit), (Legacy 64-Bit) or (Legacy 32-Bit).
2. Connection Methods:
Display, Keyboard and Mouse: An always avaliable hardware method.
SSH: SSH is preinstalled in Raspberry Pi OS, but is disabled by default. SSH is often enabled at SD Card setup time by the operator. Additional information can be found here: Raspberry Pi SSH Server Setup
Raspberry Pi Connect: Raspberry Pi Connect is preinstalled in Raspberry Pi OS, but is disabled by default. Raspberry Pi Connect is sometimes enabled at SD Card setup time by the operator. Additional information can be found here: Raspberry Pi Connect Setup
VNC: VNC is preinstalled in Raspberry Pi OS, but is disabled by default. VNC can be enabled any time after the inital boot. Additional information can be found here: Raspberry Pi VNC Server Setup
TeamViewer: TeamViewer is premium third party app. TeamViewer can be installed any time after the inital boot. Additional information can be found here: Raspberry Pi TeamViewer Setup
FTP: FTP is a file transfer only native debium app, however it is not preinstalled in Raspberry Pi OS. FTP can be installed any time after the inital boot. Additional information can be found here: Raspberry Pi FTP Server Setup
3. Internet access:
Some of the steps below assume and require the Raspberry Pi is connected to a network with access to the Internet.